Grand AM L4-144 2.4L DOHC VIN T SFI (1997)
Wheel Speed Sensor: Description and Operation
Front Sensor Wiring
CAUTION: The front wheel speed sensor wiring is not repairable in the control arm section of the wiring harness. this section of the wiring harness
must be replaced with the appropriate wiring harness service kit "pigtail." Do not attempt to solder, splice, or crimp this section of the wiring harnesses
as eventual failure will likely result.
DESCRIPTION
The front wheel speed sensor wiring is constructed of highly flexible twisted pair wiring. This wiring exists because the front wheel speed sensor
wiring circuits must connect to the suspension of the vehicle, thus the wiring in this area is subjected to the same motion as a spring or shock absorber.
Consequently, any repair to the front wheel speed sensor wiring circuits in the control arm section of the wiring harness will result in stiffening and
eventual failure due to wire fatigue.
