Grand AM L4-144 2.4L DOHC VIN T SFI (1997)
Manifold Pressure/Vacuum Sensor: Service and Repair
REMOVE OR DISCONNECT
Notice: Numbers in text correspond to numbered components in image.
1. Remove the air cleaner outlet resonator.
2. Disconnect the MAP sensor electrical connector.
3. Remove the MAP sensor attaching screws (1).
4. Remove the MAP sensor vacuum hose (2).
INSTALL OR CONNECT
1. Connect the vacuum hose (2).
2. Install the MAP sensor attaching screw (1) and tighten to 6.5 Nm (5.7 lb. in.).
3. Connect the MAP sensor electrical connector.
4. Install the air cleaner outlet resonator.
