Grand AM L4-144 2.4L DOHC VIN T SFI (1997)
Oil Separator: Service and Repair
REMOVE OR DISCONNECT
NOTE: Numbers in text correspond to numbered components in image.
1. Remove the Air cleaner outlet resonator. Refer to Air Cleaner Outlet Resonator.
2. Remove the intake manifold.
3. Disconnect the oil/air separator vent hoses (1).
4. Remove the oil/air separator mounting bolts (2).
5. Remove the oil/air separator assembly (3).
INSTALL OR CONNECT
1. Install the oil/air separator assembly (3).
2. Install the oil/air separator mounting bolts (2). Tighten the oil/air separator mounting bolts to 20-28 Nm (15-18 lb. ft.).
NOTE: When installing hoses, apply a small film of soap to the inside edges of the hose prior to installation.
3. Connect the oil/air separator vent hoses (1).
4. Install the intake manifold.
5. Connect the Air cleaner outlet resonator.