Grand AM L4-144 2.4L DOHC VIN T SFI (1997)
Starter Motor: Service and Repair
On-Vehicle Service
Lubrication
Starter motors do not require lubrication except during overhaul.
Starter Replacement
Starter Mounting
REMOVE OR DISCONNECT
1. Negative battery cable.
2. Air inlet duct to throttle body.
3. Top starter bolt.
4. Raise vehicle.
5. Lower starter bolt.
6. Position engine wiring harness aside.
7. Position starter for access to solenoid wiring.
8. Electrical wiring.
9. Starter.
INSTALL OR CONNECT
1. Electrical wiring.
2. Position starter to engine.
3. Lower starter bolt.
4. Reposition engine wiring harness.
5. Lower vehicle.
6. Top starter bolt.
7. Air inlet duct to throttle body.
8. Negative battery cable.