Grand AM L4-144 2.4L DOHC VIN T SFI (1997)
7. Accumulator assembly, 2-1 manual servo piston assembly and filter, and seal.
^
To disassemble and inspect the accumulator and 2-1 manual servo assemblies, refer to the transmission overhaul procedures. Disassembled
views are shown for reference only.
INSTALL OR CONNECT
1. 2-1 manual servo piston assembly, filter and seal.
Important: The seal must be installed as shown. If it is not installed, or is installed in the wrong location, the transaxle will operate only in
"Reverse".
2. Accumulator assembly and attaching bolts.
Tighten
^
Bolts to 27 Nm (20 ft. lbs.).
3. New filter seal, if removed, and oil filter.
4. Oil pan gasket; gasket may be re-used, unless sealing ribs are damaged. If damaged, use new gasket.
5. Oil pan and attaching bolts.
Tighten
^
Pan bolts to 16 to 17 Nm (12 to 13 ft. lbs.).
6. Lower vehicle.
7. Fill transaxle to proper level.
Inspect
^
Oil pan gasket for leaks.