Grand AM L4-144 2.4L DOHC VIN T SFI (1997)
5. Remove the range select lever cable from the automatic transmission control.
6. Remove the cable grommet at the cowl.
7. Remove the cable from the vehicle.
INSTALL
1. Install the cable to the vehicle through the cowl and the carpet.
2. Install the cable grommet in the cowl.
3. Install the cable grommet bolts in the cowl.
^
Tighten the bolts to 1.9 Nm (17 inch lbs.).
Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners
requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use
paints, lubricants, or corrosion inhibitors or fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint
clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid
damage to parts and systems.
4. Install the range select lever cable at the automatic transmission control.
5. Install the center console.
