Grand AM L4-144 2.4L DOHC VIN T SFI (1997)
^
Install and tighten bolts 1, 2, 3 then 4, 5, 6, to 16 Nm (12 ft. lbs.) in order.
^
Tighten bolts 1, 2, 3 then 4, 5, 6 to 20 Nm (15 lb ft), then additional rotation of 45 degrees.
^
Remove J 29074.
3. Lubricate the inside diameter of the bearing with clutch bearing lubricant GM P/N 12345777 or equivalent.
4. Transaxle.
5. Clutch master cylinder assembly to clutch actuator cylinder assembly.
6. Bleed hydraulic system, refer to "HYDRAULIC SYSTEM BLEEDING PROCEDURE."
7. Negative battery cable.
