Grand AM V6-3.4L VIN E (2001)
Tighten the retaining screw to 6 Nm (53 lb in).
28.
Re-install the fuse panel cover to the left I/P.
29.
Remove the right insulator panel.
30.
Remove the body control module (BCM).
31.
Install a new BCM.
32.
Re-install the right insulator panel.
33.
Re-install the trim panel supports and trim panel to the rear shelf.
34.
Re-install the trim panel push pin retainers.
35.
Re-install the rear quarter upper trim panels.
36.
Re-install the garment hooks.
37.
Properly position the rear seat shoulder harness retractor and install the bolt.
Tighten
Tighten the bolt to 36 Nm (27 lb ft).
38.
Re-install both lower rear quarter trim panels.
39.
Re-install the rear seat side bolsters/back rest assembly.