Grand AM V6-3.4L VIN E (2001)
Rear Bumper Reinforcement: Service and Repair
Rear Bumper Impact Bar Replacement
Removal Procedure
1. Remove the rear bumper fascia.
2. Remove the rear energy absorber.
3. Disconnect the wiring harness from the rear bumper impact bar.
4. Remove the rear impact bar nuts from the rear impact bar.
5. Remove the rear impact bar from the vehicle.
Installation Procedure
1. Position the rear impact bar to the vehicle.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the rear impact bar nuts to the rear impact bar.
Tighten the nuts to 25 N.m (18 lb ft).