Grand AM V6-3.4L VIN E (2001)
Rear Bumper Shock Absorber: Service and Repair
Rear Energy Absorber Replacement
Removal Procedure
1. Remove the rear bumper fascia.
2. Remove the push-in retainers (3) from the rear bumper energy absorber.
3. Remove the rear bumper energy absorber (2) from the impact bar (1).
Installation Procedure
1. Position the rear bumper energy absorber (2) to the impact bar (1).
2. Install the push-in retainers (3) to the rear bumper energy absorber (3).
3. Install the rear bumper fascia.