Grand AM V6-3.4L VIN E (2001)
1. Remove the screw (1) from the bezel.
2. Pull the front of the bezel out of the door trim panel (2).
3. Lift the door handle and remove the bezel.
INSTALLATION PROCEDURE
1. Push the bezel into the trim panel, making sure the rear tabs engage and press until fully seated.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the door handle bezel screw (1).
Tighten
Tighten the front/rear door handle bezel screw to 2 N.m (18 lb in).
Door Handle Bezel Replacement (Pontiac)
Door Handle Bezel Replacement (Pontiac)
Removal Procedure