Grand AM V6-3.4L VIN E (2001)
Rear Door Hinge: Service and Repair
Rear Side Door Hinge Replacement
Removal Procedure
1. Open and support the door.
2. Remove the rear door rubber conduit from the center pillar.
3. Disconnect the electrical connector from the body harness.
4. Remove the rear door check link to pillar bolt.
5. Remove the door intermediate hinge bolts.
6. Remove the door from the vehicle.
7. Clean the area around the hinges and mark the location with a grease pencil.
8. Remove the bolts securing the hinge to the rear door.