Grand AM V6-3.4L VIN E (2001)
Arm Rest: Service and Repair
Armrest Bracket Replacement
Removal Procedure
1. Remove the rear door trim panel (1).
2. Remove the armrest bracket screws.
3. Remove the armrest bracket (2) from the door trim panel (1).
Installation Procedure
1. Position the armrest bracket (2) on the door trim panel (1).
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the armrest bracket screws.
Tighten the armrest bracket screws to 10 N.m (89 lb in).
3. Install the rear door trim pane (1).
