Grand AM V6-3.4L VIN E (2001)
4. Remove the front floor console trim plate seal by rotating 90 degrees and guiding it over the shift handle.
Installation Procedure
1. Position the front floor console trim plate seal over the gear selector knob sliding down and rotating 90 degrees.
2. Install the front floor console trim plate seal. Make sure the seal is fully seated.
3. Reposition the gear selector to the Park position.
4. Release the park brake.
Roof Console Replacement
Roof Console Replacement
Removal Procedure
1. Remove the headliner.
2. Cut the retainer clips off of the rear posts.
3. Remove the overhead console (1) from the headliner.
Installation Procedure