Grand AM V6-3.4L VIN E (2001)
Power Door Lock Actuator: Service and Repair
Lock Actuator Replacement - Front Door
REMOVAL PROCEDURE
1. Remove the front door lock.
2. Remove the door lock actuator screws (2).
3. Remove the door lock actuator (1) from the lock (3).
INSTALLATION PROCEDURE
1. Position the front door lock actuator (1) on the lock (3).
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the door lock actuator screws (2).
Tighten
Tighten the door lock actuator screws (2) to 6 N.m (53 lb in).
3. Install the front door lock.