Grand AM V6-3.4L VIN E (2001)
The tail lamp harness grommet may become mispositioned in the opening on the right or left side of the vehicle.
Correction
Reposition the grommet to fit in the opening properly. Also, inspect the harness inside the trunk behind the carpet trim. If the harness is too tight, release
it from the retention clip. Route it in a manner so that it will not cause a future rattle noise or chafe on any sharp metal edge. Note that if the harness is
not released from the retention clip and there is no slack, the condition may re-occur when objects are placed in the trunk in a manner that applies
pressure to that harness.
Parts Information
Parts are currently available from GMSPO.
Cleaners
^
3M(R) General Purpose Adhesive Cleaner, P/N 08984
^
Dominion Sure Seal, Sure Solve Stock BSS
^
Kent Acrosol(TM)
Seam Sealers
^
3M(R) Ultropro(TM) Autobody Sealant
^
Kent High Tech Seam Sealer Clear 10200
^
Dominion Sure Seal Heavy Duty Drip Check LCS Item # 9019
DISCLAIMER
