Grand AM V6-3.4L VIN E (2001)
2. Lubricate the caliper bolts with GM P/N 18010908 high temperature silicone brake lubricant or equivalent. Do not lubricate the threads.
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the caliper bolts. Ensure that the boot is securely in the groove of the caliper bolt.
^
Tighten the caliper bolts to 110 Nm (81 ft. lbs.).
4. Install new gaskets (2) and the brake hose bolt to the brake hose inlet fitting.
5. Install the brake hose bolt and fitting to the caliper.
^
Tighten the brake hose bolt to 50 Nm (37 ft. lbs.).
6. Remove the two hand tightened wheel lug nuts retaining the rotor to the hub.
7. Install the tire and wheel assembly.
8. Lower the vehicle.
9. Fill the master cylinder to the proper level with clean brake fluid. Refer to Master Cylinder Reservoir Filling.
10. Bleed the entire brake system. Refer to Hydraulic Brake System Bleeding (Manual) or Hydraulic Brake System Bleeding (Pressure).
11. Inspect the hydraulic brake system for brake fluid leaks.
