Grand AM V6-3.4L VIN E (2001)
1. Install the brake hose (2) to the vehicle.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the rear brake hose retaining bolt (3) to the rear brake hose (2).
^
Tighten the retaining bolt to 50 Nm (37 ft. lbs.).
3. Install the brake hose (3) to the bracket (1).
4. Install the retainer clip (4) to the brake hose (1).
5. Install the rear brake pipe (3) to the brake hose (1).
^
Tighten the fitting to 27 Nm (20 ft. lbs.).
6. Bleed the brake hydraulic system. Refer to Hydraulic Brake System Bleeding (Manual) or Hydraulic Brake System Bleeding (Pressure).
7. Lower the vehicle.
