Grand AM V6-3.4L VIN E (2001)
Valve Cover: Service and Repair
Valve Rocker Arm Cover Replacement (Left)
Valve Rocker Arm Cover Replacement - Left
Removal Procedure
1. Partially drain the cooling system.
2. Remove the front ignition wire harness at the upper intake manifold and at the spark plugs.
3. Remove the thermostat bypass pipe.
4. Disconnect the Positive Crankcase Ventilation (PCV) vacuum hose.
5. Remove the valve rocker cover bolts.
6. Remove the valve rocker cover.
Bump the end of the valve rocker cover with the palm of your hand or a soft rubber mallet if the cover adheres to the cylinder head.
7. Clean the sealing surface on the cylinder head and the valve rocker cover with degreaser.
Installation Procedure
1. Install a new gasket and new bolt grommets to the valve rocker cover. Ensure that the gasket is seated properly in the valve groove.
