Grand AM V6-3.4L VIN E (2001)
Engine Oil Dip Stick - Dip Stick Tube: Service and Repair
Removal Procedure
1. Remove the oil level indicator tube bolt.
2. Remove the oil level indicator tube from the engine.
Installation Procedure
1. Install the oil level indicator tube to the engine. Ensure that the tube assembly is fully seated in the engine.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the oil level indicator tube bolt.
Tighten the oil level indicator tube bolt to 25 Nm (18 ft. lbs.).