Grand AM V6-3.4L VIN E (2001)
5. Install the lower intake manifold.
Notice: Failure to tighten vertical bolts before the diagonal bolts may cause an oil leak.
6. Apply sealant GM P/N 12345382 to the threads of the bolts.
Install the lower intake manifold bolts.
Notice: Refer to Fastener Notice in Service Precautions.
7. Install NEW lower intake manifold bolts.
The torque specification is a 2-step process; tighten the vertical lower intake manifold bolts (the four middle ones) to 7 Nm (62 lb in). Tighten the
diagonal lower intake manifold bolts (two on each end) to 7 Nm (62 lb in).Tighten the vertical lower intake manifold bolts (the four middle ones)
to 13 Nm (115 lb in). Tighten the diagonal lower intake manifold bolts (two on each end) to 25 Nm (18 lb ft).
9. Install the valve rocker covers.
10. Install the radiator hose to the thermostat housing.
