Grand AM V6-3.4L VIN E (2001)
Compressor Clutch: Service and Repair
Clutch Rotor and/or Bearing Removal
TOOLS REQUIRED
^
J 41790 Compressor Holding Fixture
^
J 41552 Compressor Pulley Puller
^
J 33023-A Puller Pilot
1. Install the compressor onto the J 41790.
2. Remove the clutch plate and hub assembly (2).
3. Remove the clutch rotor and bearing assembly retaining ring (3) using external snap ring pliers (1).
