Grand AM V6-3.4L VIN E (2001)
4. For compression-style fittings; carefully slide the new O-ring seal (1) onto the A/C refrigerant hose until seated.
5. For banjo-style fittings; carefully slide the new O-ring seal (1) onto the A/C refrigerant hose until seated.
Leave a light coating of the refrigerant oil on the A/C refrigerant hose in the area indicated (2) ONLY.
6. Install the A/C refrigerant hose to the A/C refrigerant component.
7. For compression-style fittings; use a wrench on the A/C refrigerant component (smaller size) fitting (2), then tighten the A/C refrigerant hose
(larger Size) fitting (1) to specification.
8. For banjo-style fittings; install the bolt or the nut retaining the A/C refrigerant hose to the A/C refrigerant component, then tighten to specification.
9. Evacuate and charge the refrigerant system. Refer to Refrigerant Recovery and Recharging.
10. Leak test the fittings of the component using the J 39400-A.
