Grand AM V6-3.4L VIN E (2001)
Refrigerant Pressure Sensor / Switch: Service and Repair
A/C REFRIGERANT PRESSURE SENSOR REPLACEMENT
TOOLS REQUIRED
^
J 34611-A Valve Core Remove and Installer
^
J 39400-A Halogen Leak Detector
REMOVAL PROCEDURE
The A/C pressure sensor is located on the condenser end of the compressor hose. A Schrader valve is located in the A/C pressure sensor fitting.
1. Recover the refrigerant. Refer to Refrigerant Recovery and Recharging.
2. Disconnect the refrigerant pressure sensor electrical connector.
3. Remove the refrigerant pressure sensor from the fitting.
4. Remove and discard the O-ring.