Grand AM V6-3.4L VIN E (2001)
1. Position the multifunction switch (1) on the steering column (2) while depressing the spring loaded horn pin.
2. Connect the electrical connectors (3) to the multifunction switch (1).
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the multifunction switch (2) retaining screw.
Tighten the multifunction switch retaining screws to 4 Nm (35 inch lbs.).
4. Install the steering column trim cover.
Refer to Steering Column Trim Covers Replacement - On Vehicle.
5. Enable the SIR system. Refer to Disabling the SIR System in Restraint Systems.