Grand AM V6-3.4L VIN E (2001)
Installation Procedure
1. Connect the electrical connector to the power seat switch.
2. Position the power seat switch to the seat cushion frame.
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the power seat switch screws.
Tighten the screws to 3 N.m (27 lb in).
4. Adjust the front seat cushion cover. Refer to Front Seat Cushion Cover Replacement.
5. Align the bezel to the power seat switch and press into place until fully seated.
6. Adjust the front bucket seat to the original position.
