Grand AM V6-3.4L VIN E (2001)
Power Steering Line/Hose: Service and Repair
P/S Pressure Hose Replacement
Removal Procedure
1. Remove the drive belt from the vehicle.
2. Remove the power steering hose retaining nut (1) from the retaining bracket (2).
3. Remove the pressure hose (4) from the power steering pump (1).
4. Raise the vehicle on a hoist. Refer to Vehicle Lifting.
5. Remove the pressure hose (4) from the retaining bracket (6).
6. Remove the pressure hose (4) from the power steering gear (5).
7. Remove the pressure hose (4) from the vehicle.
Installation Procedure
Notice:
-
Refer to Installing Hoses Without Twists or Bends Notice in Service Precautions.
-
Refer to Fastener Notice in Service Precautions.