Grand AM V6-3.4L VIN E (2001)
4. Install the strut rod piston nut.
Tighten
Tighten the strut rod piston nut (2) to 47 Nm (34 ft. lbs.).
5. Pack the strut support with the wheel bearing lubricant GM P/N 1051344, or equivalent.
6. Install the dust cap (1).
7. Release the compressed coil spring (10).
8. Remove the strut from the J 34013-B
9. Install the strut assembly. Refer to Strut Assembly Replacement.
Strut Assembly Replacement
Removal Procedure
1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Remove the tire and wheel assembly.
3. Scribe the strut to the knuckle. Refer to Strut and Knuckle Scribing.
4. Remove the strut mount to body nut (1) in the trunk area.
5. Remove the strut bolts (3) from inside the fender well.