Grand AM V6-3.4L VIN E (2001)
1. Clean and inspect the oil pan for dents or damage. Dry the oil pan before installation.
2. Install the oil pan gasket. Use a new gasket if the sealing ribs are damaged.
3. Install the oil pan. Replace the bottom pan if damaged.
Notice: Refer to Fastener Notice in Service Precautions.
4. Install the oil pan attaching bolts.
^
Tighten the bolts to 14 Nm (124 inch lbs.).
5. Lower the vehicle.
6. Check the pan for leaks. Refill the transmission to the proper level with DEXRON-III.
7. Recheck the fluid level.
8. Inspect the oil pan gasket for leaks.
