Grand AM V6-3.4L VIN E (2001)
2. Install the J 29074 in order to support the clutch cover to the flywheel assembly.
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the clutch cover to flywheel bolts (1,2,3,4,5,6).
3.1.
Follow the tightening sequence.
^
Tighten the bolts to 16 Nm (12 ft. lbs.).
3.2.
Tighten the bolts to specifications.
4. Remove the J29074.
5. Lubricate the inside diameter of the bearing with GM P/N 12345777, or equivalent.
6. Install the transmission.
7. Bleed the hydraulic system.
8. Connect the negative battery cable.