Grand AM V6-3.4L VIN E (2001)
Window Frame: Service and Repair
Window Channel Replacement - Rear Door Front
REMOVAL PROCEDURE
1. Ensure that the window is fully closed.
2. Remove the door trim panel.
3. Remove the water deflector.
4. Remove the window regulator.
5. Lower the window to the bottom of the door
6. Remove the lower bolt.
7. Lift the channel to disconnect the upper fastener.
8. Remove the front window channel (1) from the door.
INSTALLATION PROCEDURE
1. Position the front window channel (1) in the door, top end first.
2. Insert the channel top retainer into the slot.
3. Rotate the top of the front window channel rearward and align it on the lower edge of the window.
NOTE: Refer to Fastener Notice in Service Precautions.
4. Install the rear door window channel lower bolt.
Tighten
Tighten the rear door window channel lower bolt to 9 N.m (80 lb in).