pontiac Workshop Repair Guides

Pontiac Workshop Service and Repair Manuals

Customer Interest for Trunk / Liftgate Hinge: > < Rear Compartment Lid Hinge Covers - Loose/Rattle
Page 2
background image

1. Remove RH/LH rear compartment lid hinge cover. Refer to Figure 1, Item 1.

2. Remove rear compartment lid hinge cover retainer. Refer to Figure 1, Item 2.

3. Install new rear compartment lid hinge cover retainer, P/N 22591829. Refer to Figure 1, Item 2.

4. Install a sticky back foam pad, 3 x 18 x 30 mm, to underside of RH/LH rear compartment lid hinge cover between the retainer hole and the cross.

Refer to Figure 1, Item 3.

5. Install RH/LH rear compartment lid hinge cover. Refer to Figure 1, Item 1.

PARTS INFORMATION

Parts are currently available from GMSPO.

WARRANTY INFORMATION:

For vehicles repaired under warranty, use:

Labor Operation 

Labor Time

C4605 (Right) 

Use published labor

C4606 (Left) 

operation time.

Customer Interest for Trunk / Liftgate Hinge: > < Rear Compartment Lid Hinge Covers - Loose/Rattle