Grand AM V6-3100 3.1L MFI VIN M (1994)
Blower Motor: Service and Repair
Without Air Conditioning
Heater Blower Assembly
Blower Case Insulator "Cut" Diagram
REMOVE OR DISCONNECT
1. Negative battery cable.
2. Generator belt.
3. Generator, set aside.
4. Blower motor electrical connection.
5. Partially cut blower case cover as indicated on cover.
CAUTION:
^ Cutting completely around cover is not required.
^ Cover thickness is approx. 2 mm (1/8 in.). Make cut just through thickness of cover. Excessive depth of cut may damage cooling tube.
6. Swing cut out portion of cover down.
7. Blower motor cooling tube.
8. Blower motor retaining screws.
9. Blower motor assembly.
