Grand AM V6-3100 3.1L MFI VIN M (1994)
Cruise Control Switch: Service and Repair
Headlamp /Turn Signal/ Cruise Control/ Hazard Switch
Fig. 12 Column Mounted Switch Replacement.
Remove or Disconnect
This lever includes the headlamp, headlamp dimmer, turn signal and hazard switches. It also includes the cruise control switch, if equipped.
1. Horn pad and steering wheel, See: Steering and Suspension/Steering/Steering Wheel/Service and Repair
2. Tilt lever from column, if used.
Notice: If necessary, use locking pliers with a piece of rubber (such as spark plug boot) between the jaws to aid in preventing damage to the tilt lever
during removal.
3. Upper and lower steering column covers.
4. Dampener assembly.
5. Switch assembly.
Install or Connect
1. Switch assembly.
2. Dampener assembly.
3. Upper and lower steering column covers.
4. Tilt lever to column, if used.
5. Horn pad and steering wheel.