Grand AM V6-3300 3.3L (1992)
Rear Door Panel: Technical Service Bulletins
Doors - Updated Trim Panel R&R
Bulletin Number: 92-10-14
Reference Number: 131061
Publish Date: 11/91
Subject:
SERVICE MANUAL UPDATE - SECTION 10 BODY DOOR TRIM PANEL 2 AND 4 DOOR
Models Affected:
1992 GRAND AM MODELS
Door Trim Panel - 2 and 4 Door:
Figure 5 - In Service Manual
Remove or Disconnect
1.
Screw (2).
2.
Screw (9).
3.
Screw (1).
4.
Manual lock rod knob (3).
5.
Screw (4).
6.
Inside door handle escutcheon (5) by pulling out at bottom and disengaging top of escutcheon from door trim panel.
7.
Escutcheon (5) from inside door handle.
8.
Door lock switch and escutcheon. Refer to procedure in this section. (9) Outside mirror escutcheon. Refer to procedure in this section.
9.
Escutcheon (6) by prying at inboard edge with a thin bladed screwdriver.
10.
Manual window regulator handle if applicable. Refer to procedure in the section.
11.
Grasp trim panel by hand and gently pull outward to release fasteners (7) from retainers (11).
12.
Door trim panel (1) by lifting at bottom of panel to disengage hooks (8) from slots on inner door panel.
Install or Connect
1.
Door trim panel (1) by routing seat belts and door lock harness through trim panel.
- Align hooks (8) to slots at top of inner door panel and engage to secure.
- Align fasteners (7) on trim panel to retainers (11) and push outboard on trim panel until fasteners are fully seated.
2.
Manual window regulator handle if applicable.
3.
Escutcheon (6).
4.
Outside mirror escutcheon.
5.
Connector to power lock switch.
6.
Door lock switch and escutcheon.
7.
Screw (4).
8.
Manual lock rod knob (3).
9.
Screw (9).
10.
Screw (10).
11.
Screw (11).
