pontiac Workshop Repair Guides

Pontiac Workshop Service and Repair Manuals

All Technical Service Bulletins for Steering Gear:|333212A > < Tools - Adjuster Locknut Wrench|Page 5706
Page 1
background image

Steering Gear: All Technical Service Bulletins
Steering Wheel - Noise at Right Dash Area When Turning

File In Section: 3 - Steering/Suspension

Bulletin No.: 43-32-11

Date: November, 1994

Subject:
Crunch Noise from Right Side Dash Area when Turning Steering Wheel (Replace Steering Grommet)

Models:
1991-94

Buick Skylark

1991-94

Chevrolet Beretta, Corsica, Cavalier

1991

Oldsmobile Cutlass Calais

1992-94

Oldsmobile Achieva

1991-94

Pontiac Grand Am, Sun bird

VIN Breakpoints:
1994 vehicles built prior to the following VIN numbers:

J Car: R7574194 (Pontiac Lordstown) 

R7293501 (Chevrolet Lordstown) 
All "J" cars assembled in Ramos

L Car: RY250151

N Car: RM573861

RM037851
RC777220
RC285393

Condition

Some owners may comment on a brief crunch noise originating from the right side dash area as the steering wheel is being turned. This noise would be
more noticeable when the wheel has been turned full right, then turned back to the left. This noise may be more noticeable when the vehicle is stopped or
moving slowly during parking maneuvers. Also, this noise would only occur during cold temperatures below 4O°F (4°C).

Cause

The rubber grommets retaining the steering gear may flex and exhibit a crunch noise.

Correction

Install a new steering grommet, P/N 26047683, on the right side. The new grommet has a softer compound to allow more compliance without crunching.

Parts Information

Parts are currently available from GMSPO.

Warranty Information

For vehicles repaired under warranty, use:

Labor Operation

Labor Time

E9745

0.5 hr.

All Technical Service Bulletins for Steering Gear:|333212A > < Tools - Adjuster Locknut Wrench|Page 5706