Grand AM V6-3300 3.3L (1992)
3.
Use an 8 mm internal hex driver and remove the pipe expansion bolt.
4.
Clean the threads in the transaxle support assembly and remove any metal shavings or other debris that will cause an incorrect torque reading.
5.
Install and tighten pipe expansion bolt to 55 N-m (41 lbs.ft.).
6.
Install left front tire and wheel assembly and tighten wheel nuts to specification, refer to SECTION 3E in the service manual.
7.
Lower vehicle.
PARTS INFORMATION:
Replace the pipe expansion bolt only if necessary using P/N 22585159. This is an updated pipe expansion bolt that has a hardened internal hex.
Parts are currently available from GMSPO.
Labor Operation Number: T1925
Labor Time: 0.4 Hour
