Grand Prix V6-191 3.1L (1989)
5.
Install a 3/8" x 1" bolt and appropriate nut at the hole location.
IMPORTANT:
Use a 3/8" x 1 1/4" washer on either side of the fascia material in order to spread the bolt load and avoid damage to the
fascia material.
6.
Repeat for opposite side of vehicle if necessary.
Labor Operation Number:
T1614
Labor Time:
.4 Hours
Technical Service Bulletin # 901036
Date: 900701
Bumper Fascia - Inadequately Reinforced
Bulletin Number:
90-10-36
Reference Number:
031032R
Publish Date:
7/90
Subject:
WARPED OR WAVY FRONT BUMPER FASCIA UNDER GRILLE (INSTALL NEW PART REINFORCEMENT)
Models
Affected:
1989 AND EARLY 90 GRAND PRIX TURBO MODELS ONLY
