Grand Prix V6-191 3.1L (1989)
FIGURE 3
CONDITION:
2. Some 1989 and early 1990 Pontiac Grand Prix turbo models may exhibit a gapping condition between front bumper
lower fascia and front bumper fascia.
CORRECTION:
1.
Raise vehicle.
2.
Inspect front bumper lower fascia for location of gaps to the front bumper fascia. Mark the center location of the gaps on the bottom surface of the
front bumper lower fascia attachment flange.
3.
Using a 1-1/4" O.D. x 3/8" I.D. washer as a hole locator, position the washer on the marked location then mark center hole using a 3/8" (9.5 mm)
drill bit.
4.
Drill holes through front bumper lower fascia attachment flange and front bumper fascia where marked for washer center hole using a 3/8" (9.5
mm) drill bit.
