Grand Prix V6-191 3.1L (1989)
Figure 2
Install or Connect (Figure 2, after modification:)
1.
Position inner hood support (5) to hood (1).
2.
Hood strut support bracket (4).
3.
Bolts (3).
-
Tighten bolts (3) to 10 N-m (84 in.lbs.)
4.
Hood open assist rods (2) to hood strut support brackets (4).
5.
Drill hole through inner hood supports into hood inner reinforcement, using a 4.7 mm (3/16") drill bit with a 13 mm (1/2" drill stop.
6.
Apply primer to holes drilled, using zinc chromate primer or equivalent.
7.
Rivets (6) to secure the inner hood supports to the hood inner reinforcement.
Labor Operation Number:
T1583
Labor Time:
0.3 Hours