Grand Prix V6-191 3.1L (1989)
Jack: Technical Service Bulletins
Tools - Lug Wrench Socket and Ratchet Handle Revised
Bulletin Number:
90-10-33
Reference Number:
030106
Publish Date:
5/90
Subject:
LUG WRENCH SOCKET AND JACK HANDLE (NEW REPLACEMENT PART)
Models
Affected:
1988 THROUGH EARLY 1990 GRAND PRIX MODELS
CONDITION:
New replacement parts for lug wrench socket and jack handle.
CORRECTION:
Replace the old lug wrench socket and ratchet handle with new parts. The new part is mounted under the spare tire cover and will require a modification
to the tire cover as well as a new label for the cover.
Parts Required:
Kit # 12506758 Contains the following parts:
1 - 10158395 Handle Assembly 1 - 10165650 Bolt/screw, Jack Handle
1 - 10165652 Nut, Jack Handle 1 - 10165653 Label, Jack Usage
Parts are currently available from GMSPO.
PROCEDURE:
1.
Open rear compartment lid, remove floor covering and the large retaining plate for the spare tire cover.
2.
Determine the approximate centerline of large hole on the spare tire cover, draw a line parallel to centerline of vehicle from the hole to the forward
edge of the spare tire cover.
3.
Mark a location on the centerline 150.0 mm (5-7/8") forward of the large retainer plate hole in the spare tire cover (See Illustration).