pontiac Workshop Repair Guides

Pontiac Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 2331 > < Diagram Information and Instructions|Page 2328
Page 1
background image

Heavy Duty Coolant Fan: Initial Inspection and Diagnostic Overview

1.

If both coolant fans do not operate, check IGN fuse. On 1991 Regal models, check FAN fuse also.

2.

If a coolant fan does not operate, check fusible links E and G on 1989-90 models and N and L on 1991 models.

3.

If coolant fan runs with ignition switch in OFF position, replace suspect coolant fan relay.

4.

 On 1989-90 models, if both primary and secondary coolant fans do not come on when refrigerant pressure exceeds 200 psi, disconnect A/C
refrigerant pressure switch. If fans come on, replace switch.

Initial Inspection and Diagnostic Overview|Page 2331 > < Diagram Information and Instructions|Page 2328