pontiac Workshop Repair Guides

Pontiac Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 7007 > < Diagram Information and Instructions|Page 7004
Page 1
background image

Blower Motor: Initial Inspection and Diagnostic Overview

Try the following checks before doing the System Diagnosis:

1. Check A/C-2 Fuse by visual inspection.

2. Check that ground G103 is clean and tight.

3. Check that Blower Motor connector and High and Low Blower Relays are firmly seated.

^

Go to the Heater and A/C System Check for a guide to normal operation of entire system.

^

Go to System Diagnosis for diagnostic tests of Blower Controls. See: Testing and Inspection

Initial Inspection and Diagnostic Overview|Page 7007 > < Diagram Information and Instructions|Page 7004