Grand Prix V6-191 3.1L (1989)
5.
Inspect Cancel Cam Foam Shield for rips to see if the Steering Wheel has been making contact with the Cancel Cam. Re-torque the Steering
Wheel to specifications listed in SECTION 3F.
6.
Check for possible bent or damaged optical devices.
7.
Check all connectors for loose or corroded terminals.
^
Check for a broken (or partially broken) wire inside of the insulation which could cause system failure but prove "GOOD" in a continuity/voltage
check (see "Troubleshooting Procedures," page 8A-4-0).
^
Check for proper installation of aftermarket electronic equipment which may affect the integrity of other systems (see "Troubleshooting
Procedures," page 8A-4-0).
^
Refer to System Diagnosis.
SYSTEM DIAGNOSIS
^
Select a symptom from the Symptom Table and follow the diagnosis given.
^
Tests follow the Symptom Table.
^
See SECTION 3F1 for Steering Wheel removal procedures.