Grand Prix V6-191 3.1L (1989)
Figure 2
3.
Strut shaft nut using No. 50 torx bit and J 35669, refer to Figure 2.
Figure 3
4.
Strut mount bushing (5) by prying with suitable tool, refer to Figure 3.
-
Use J 35668 to apply pressure on strut shaft (13) as necessary to relieve bushing (compression) side load.
Figure 4
5.
Jounce bumper (7) by attaching J 35668 to strut shaft and pulling out jounce bumper. Refer to Figure 4.