Grand Prix V6-191 3.1L (1989)
FIG. 2
4.
Remove the motor from the regulator and the remaining portions of the rivets.
5.
Position new motor to the regulator backplate and with the aid of a helper, install motor with 1 rivet (bottom location, Figure 1) by collapsing
or crushing end of rivet (P/N 9441949) with a ball peen type hammer as shown in Figure 2.
Parts are currently available from GMSPO.
FIG. 3
6.
Once the motor is installed with 1 rivet, clamp the motor to the backplate with locking pliers as shown in Figure 3.
