Grand Prix V6-191 3.1L VIN M SFI (1998)
Driver/Vehicle Information Display: Service and Repair
Head Up Display Module Replacement
REMOVAL PROCEDURE
1. Remove the Instrument Panel (IP) upper trim pad.
2. Remove the instrument cluster Head Up Display (HUD) bolts.
3. Disconnect the electrical connector from the instrument cluster HUD.
4. Remove the instrument cluster HUD from the IP.
INSTALLATION PROCEDURE
1. Connect the electrical connector to the instrument cluster head up display (HUD).
2. Install the instrument cluster HUD to the instrument panel (IP).
NOTE: Refer to Fastener Notice in Cautions and Notices.
3. Install the bolts into the instrument cluster HUD.
4. Install the IP upper trim pad.