Grand Prix V6-191 3.1L VIN M SFI (1998)
4. Remove the following components from the bracket (1):
^
The boot bolts (2).
^
The bushings
5. Inspect the bracket (1) for cracks.
6. Replace the bracket (1) if necessary.
INSTALLATION PROCEDURE
1. Lubricate the following components with silicone grease:
^
New bolt boots
^
New bushings
2. Install the following components into the caliper bracket (2):
^
The bolt boots (1)
^
The bushings
NOTICE: Refer to Fastener Notice in Cautions and Notices.
3. Install the caliper bracket with the bracket bolts.
^
Tighten the caliper bolts to 185 Nm (137 ft. lbs.).
4. Install the caliper.