Grand Prix V6-191 3.1L VIN M SFI (1998)
7. Connect the heater outlet hose from the thermostat bypass pipe (2).
8. Connect the throttle body inlet and outlet hoses from the thermostat bypass pipe (1).
9. Use the J 38185 in order to reposition and install the inlet hose clamp at the thermostat housing.
10. Connect the inlet hose at the thermostat housing.
11. Install the spark plugs wires at the left bank. Refer to Spark Plug Wire Harness Replacement (3100 L82 (VIN M)) in Ignition System.
12. Install the LH engine mount strut. Refer to Engine Mount Strut Replacement (Left) in Engine Mechanical - 3.1L.
13. Carefully install the throttle body air inlet duct.
14. Fill the cooling system. Refer to Draining and Filling Cooling System in Service and Repair.
15. Inspect for leaks.
