Grand Prix V6-191 3.1L VIN M SFI (1998)
3. Align and install the park/turn signal lamp housing retaining tabs (1) to the slots (2) in the headlamp bracket.
IMPORTANT: Be sure that the sidemarker lamp socket wiring is installed into the slot in the headlamp bracket prior to fully installing the park/
turn signal lamp housing.
4. Insert the sidemarker lamp socket wiring into the slot in the headlamp bracket.
5. Carefully pivot the park/turn signal lamp housing inboard to the installed position.
NOTE: Refer to Fastener Notice in Cautions and Notices.
6. Install the park/turn signal lamp housing retaining bolt.
Tighten
Tighten the front park/turn signal lamp housing retaining bolt to 2 N.m (18 lb in).
7. Lower the hood.
8. Remove any protective tape applied during the removal procedure.
